AmishHacker Big Boy Electronics Accessory Bracket

$70.00

Preorder: Estimated Ship Date of April 15

Looking for a handy place to mount your relays, fuses, and other electronics under the hood of your Tundra? Mounting right above your brake booster (without preventing access to the master cylinder), this is the perfect accessory to clean up your after market wiring.

Included are 2 bolts / washers for easy mounting to the factory holes. The tray is approximately 13” wide by 8” deep.

Tray is shipped in unfinished aluminum (.125” thick) as the assumption is you’ll be drilling custom holes to mount your accessories; you can spray paint, anodize, etc after you have drilled your holes if desired.

This product has been developed with Double Cab Tundra’s in mind but does bolt up to First Gen Sequoias as well. While it will mount in AC versions, we do have a universal “Skinny” bracket for models with the shorter master cylinder or the hydroboost master cylinder which allows you access to the brake fluid without having to remove the bracket.

Installation notes:Only tool needed is a 4mm Allen Key.

When mounting, it will seem uneven, but try and match the curve of the cab above the brake booster to give yourself the most mounting room possible. If you have a hard line in that location, remove the hard line currently bolted above the brake booster, and reroute the lines directly to the smog canister. This is easy and causes no check engine lights.

Remember to check your spacing for any accessories mounted to the tray and that they will not interfere with the hood closing. The space narrows the closer you go to the drivers side; if unsure, put a small tower of Playdoh on your tray and close the lid. Whatever height the tower is squished to is the working height you have to mount accessories.

Refunds / returns will not be accepted once you have drilled holes into the tray to mount your accessories; measure twice, drill once.

Quantity:
Add To Cart

Preorder: Estimated Ship Date of April 15

Looking for a handy place to mount your relays, fuses, and other electronics under the hood of your Tundra? Mounting right above your brake booster (without preventing access to the master cylinder), this is the perfect accessory to clean up your after market wiring.

Included are 2 bolts / washers for easy mounting to the factory holes. The tray is approximately 13” wide by 8” deep.

Tray is shipped in unfinished aluminum (.125” thick) as the assumption is you’ll be drilling custom holes to mount your accessories; you can spray paint, anodize, etc after you have drilled your holes if desired.

This product has been developed with Double Cab Tundra’s in mind but does bolt up to First Gen Sequoias as well. While it will mount in AC versions, we do have a universal “Skinny” bracket for models with the shorter master cylinder or the hydroboost master cylinder which allows you access to the brake fluid without having to remove the bracket.

Installation notes:Only tool needed is a 4mm Allen Key.

When mounting, it will seem uneven, but try and match the curve of the cab above the brake booster to give yourself the most mounting room possible. If you have a hard line in that location, remove the hard line currently bolted above the brake booster, and reroute the lines directly to the smog canister. This is easy and causes no check engine lights.

Remember to check your spacing for any accessories mounted to the tray and that they will not interfere with the hood closing. The space narrows the closer you go to the drivers side; if unsure, put a small tower of Playdoh on your tray and close the lid. Whatever height the tower is squished to is the working height you have to mount accessories.

Refunds / returns will not be accepted once you have drilled holes into the tray to mount your accessories; measure twice, drill once.

Preorder: Estimated Ship Date of April 15

Looking for a handy place to mount your relays, fuses, and other electronics under the hood of your Tundra? Mounting right above your brake booster (without preventing access to the master cylinder), this is the perfect accessory to clean up your after market wiring.

Included are 2 bolts / washers for easy mounting to the factory holes. The tray is approximately 13” wide by 8” deep.

Tray is shipped in unfinished aluminum (.125” thick) as the assumption is you’ll be drilling custom holes to mount your accessories; you can spray paint, anodize, etc after you have drilled your holes if desired.

This product has been developed with Double Cab Tundra’s in mind but does bolt up to First Gen Sequoias as well. While it will mount in AC versions, we do have a universal “Skinny” bracket for models with the shorter master cylinder or the hydroboost master cylinder which allows you access to the brake fluid without having to remove the bracket.

Installation notes:Only tool needed is a 4mm Allen Key.

When mounting, it will seem uneven, but try and match the curve of the cab above the brake booster to give yourself the most mounting room possible. If you have a hard line in that location, remove the hard line currently bolted above the brake booster, and reroute the lines directly to the smog canister. This is easy and causes no check engine lights.

Remember to check your spacing for any accessories mounted to the tray and that they will not interfere with the hood closing. The space narrows the closer you go to the drivers side; if unsure, put a small tower of Playdoh on your tray and close the lid. Whatever height the tower is squished to is the working height you have to mount accessories.

Refunds / returns will not be accepted once you have drilled holes into the tray to mount your accessories; measure twice, drill once.